CIY LED LIMITED, customized LED Strip Light and LED Linear Light

Description
Parameters
Download

There are 36 programs inside ,donot need led controller , just power up.

Advantages

1.There are 36 programs inside ,donot need led controller , just power up.
one roll(10meters)can be powered with one power input without color difference,
Pure copper bracket and 99.99% Gold wire for Pixel LED chip gray scale 12bits (4096 Gray scales)
2. Double sides films cover the PFCB.Make sure the copper no drop from the pcb board.It comes in 5 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
3.Qty 30leds/m, 60leds/m, . 12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .Thick layer 2OZ FPCB(35um cooper)with double cooper layer.
4.A built-in test mode when no data is present, just apply power (although one third-party site indicates there may be a newer/alternative IC revision with this test mode omitted).
- 5.A fourth wire BI that is used as a backup data line. Potentially helpful if you have a single pixel failure that would have otherwise prevented the data signal making it to any subsequent pixels further down the line. This should also work with multiple failures in a string, so long as the problem does not occur with consecutive pixels.

Parameters

Specifications

Strip Type:	Auto RGB LED Color Changing Strip
LED Chip:	SMD5050 + GS8206 IC
Input Voltage:	DC12V, DC24V
PCB Width:	10mm/0.4"
LED Color:	RGB
Waterproof Rating:	Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68
Strip Length:	5m/16.4ft
LED Chip:	Sanan / Epistar
Lifespan:	30,000+hours
Beam Angle:	120°
Lumen:	20-22 lm/LED

What Else you can choose from:

12V S Type Zig-Zag LED Strip, 48LEDs/m 10mm 10W/m, 16 ICs per meter, 3-LED/62.5mm cuttable

12V 30LEDs/m GS8206 RGB LED Strip, 10mm, 7.2W/m, 10 ICs per meter, 3-LED/100mm cuttable

24V 48LEDs/m GS8206 RGB LED Strip, 10mm, 10W/m, 4 ICs per meter, 12-LED/250mm cuttable

12V 60LEDs/m GS8206 RGB LED Strip, 10mm, 14.2W/m, 20 ICs per meter, 3-LED/50mm cuttable

24V 60LEDs/m GS8206 RGB LED Strip, 10mm, 14.2W/m, 10 ICs per meter, 6-LED/100mm cuttable

Connection Ways
1.SPI signal: LED strip + LED power supply + LED controller
2.DMX control: LED strip + LED power supply + DMX Controller + DMX to spi decoder
3.LED controller: t series SD card controller, RF remote controller.DMX controller (offline/online PC)
Power supply: switching power supply/adapter

Download

Accessory

When come GS8208 self test LED strip integrates 33 lighting effects by itself, you can also use Madrix, Arduino, Adafruit NeoPixel Library, FastLED library, Raspberry Pi, K-1000C, etc. to program the extra animation effects.
Dual signals wire design, one signal wire is for backup, with signal breakpoint continued transmission function, interrupt compatibility, when one pixel fails, white the other can still work well.
It is very suitable for large lighting projects such as city skyline lighting, building outline decoration, HD advertising screen, shopping malls decoration, etc.
Notes
Custom external 8208IC high luminous efficiency single point single control 60 segments 60 light 60IC phantom light strip SMD5050 RGB full color addressable led strip

Consultation

Products RecommendedMore popular products+

: RGBCCT DMX UCS512G6 5050 5in1 RGBTW 24V 60led/m led strip

LS1012-RGBTWDMX

: 5-pin XLR connector

XLR-5P-JST

: DMX Cable with XLR-3 XLR-5 Connectors Optional Length in 1~ 20 Meters

: 24V led pixel strip light 2835 120leds car flowing waterproof led chasing running water led strip

GS8206 Pixel Strip RGB Auto LED Color Changing Strip Built In 36 Patterns Program

Model：CIY-LS1012IC-GS8206

RGBCCT DMX UCS512G6 5050 5in1 RGBTW 24V 60led/m led strip

5-pin XLR connector

DMX Cable with XLR-3 XLR-5 Connectors Optional Length in 1~ 20 Meters

24V led pixel strip light 2835 120leds car flowing waterproof led chasing running water led strip