Direct Mains 230V CCT Adjustable LED Strip Light 2700K-6000K 50m Roll

Technical Specifications: Pro-Series 230V Flicker-Free CCT

3-Step Switch-CCT 230V LED Strip | 2700K-4000K-6000K | 96LED/m 2in1 Flicker-Free | 100m Continuous Run No Controller Needed

Detailed Engineering Notes

1. Flicker Compliance (Pst LM & SVM)

As of 2026, the European Ecodesign Regulation requires strict limits on temporal light modulation.

• Pst LM ≤ 1.0: Ensures that the light does not produce short-term flicker detectable by the human eye.
• SVM ≤ 0.4: This is the critical "Stroboscopic Visibility Measure." Values below 0.4 ensure that fast-moving objects (like fans or machinery) do not appear to have a "stop-motion" effect, which is vital for industrial and office safety.

2. Integrated Constant Current IC vs. Traditional RC

Unlike cheap 230V strips that use a simple Resistor-Capacitor (RC) drop, this model utilizes an on-board Linear IC. This manages the AC-to-DC rectification while smoothing the current ripple, ensuring that the last meter of a 50m run is just as bright as the first.

3. CCT Wiring Logic

For the 230V CCT models, the wiring is typically handled in one of two ways:

• 3-Wire System: Standard L_1 (Warm), L_2 (Cool), and N (Neutral/Common). This not requires a specific CCT controller designed for high voltage.Only a common on/off wall switch is ok. 
• 2-Wire "Smart" System: Uses a carrier signal or polarity-switching IC, allowing the strip to be tuned using just two wires—ideal for retrofitting existing 2-core cabling.
• our 230V CCT strip is 2wire.