Features:
1. Ultra Long. Max length is 50m driven by single end power supply, can satisfy your choice of all lighting lengths, fewer drivers, less wiring, faster installation, and less installation cost.
2. Consistent brightness. Constant current IC on PCB, no voltage drop problem, consistent end-to-end brightness.
3. Thicker PCB. 3oz or 4oz PCB , good heat dissipation,less lighting degradation, longer lifetime,As thicker layer of copper means electricity can flow through more easily (less electrical resistance). Will create less voltage drop and allow longer runs. also dissipate heat more quickly. The LEDs will stay cooler, which will ultimately help to maximize their lifespan..
4. Serialized products: Single color, tunable white, RGB, and RGBW version are available.
5. Silicone integrated extrusion process, IP65, IP67 optional.
So we design it with constant current 10m, 20m, 30m and 50m. With same brightness from strip head to end drove only by one power supply.
Electrical & Output Data
Model No. |
LS1015-48V-SV1218 |
|
Step length |
100mm |
|
Voltage (v) |
48Vdc |
|
CRI |
80Ra/(90Ra) |
|
Color |
2100K / 2700K / 3000K / 3500K / 4000K / 5000K |
|
Power(w/m) |
4.5 |
9.6W |
Standard length |
50m/roll |
20m/roll |
Min.Bending |
R>60mm |
|
IP rate |
67 |
Light efficiency & Lumen Output
48V 4.5W-50m |
Lumen |
48V 9.6W-20m |
LED color |
Ra90 |
Ra90 |
1m test data |
|
|
2100K |
200lm/m |
380lm |
2700K |
220lm/m |
390lm |
3000K |
220lm/m |
390lm |
4000K |
240lm/m |
410lm |
5000K |
268lm/m |
440lm |
IP Process Technology |
|||
Molding Pressed (IP68) |
|
Glue Process (IP67) |
|
Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium